Lindsay Light Fixtures June 18th, 2018 - 03:29:15
In case there has never been a previously installed lighting fixture and the breaker for the fixture has not been indicated on the new breaker box one needs to determine the circuit that will power the lighting. In order to do this one needs to have somebody else turn the power switches off and on while testing the exposed wiring where the new fixture will be fitted each wire at a time using a voltage tester. Once the circuit that will power the new fixture is determined the beaker should be marked and then turned off.
Having done all of the above the base or brace of the new lighting fixture can be fastened to the ceiling studs using a screwdriver or a drill. Ensure that the like-wires are properly connected to one another and complete these connections by fastening the wire nuts. The new assembly can then be mounted on the base or brace using the available hardware.
The kitchen may be the most important room in your house to choose light fixtures for. To light up the main part of the kitchen you might want to consider fluorescent ceiling lights. If you add under cabinet lights and a hanging ceiling light over the table you will have a nice choice of modern light fixtures in your kitchen. Those who know all about lighting fixtures know that you need lots of lighting in the kitchen. Light fixtures in the dining room usually include a couple of wall fixtures and a hanging light or chandelier over the table.
At this point it is advisable to tape the beaker over just in case someone might turn it on while one is in the process of installing the new lighting fixture. Use the voltage tester to recheck the wires again even after turning the beaker off in order to be guaranteed of safety since working with live wires is a bit deadly.